ANDBON AD-30S 30L Electronic Automatic Digital Control Dry Cabinet Storage Review

DISCLAIMER: I am not a professional reviewer; I review the things I buy as a consumer. I am not at all sponsored. I am an average consumer, giving my consumer thoughts.


INTRO:

I have been a photography hobbyist and enthusiast since 2010, and since then, my gear has become more and more expensive (well, expensive is subjective, and for me, my current gear is expensive enough – you can scoff if you think my gear is cheap), and as expensive gears go, you want to keep them in tip top shape and condition as to avoid having to spend money on repairs, or God forbid, replace the entire unit in question. That hard earned cash saved upon taking care of your gear can be used to further add to that said gear and improve further your craft in photography.

That being said, I never owned a dry box or dry cabinet, because I would always end up using that money somewhere else, and being a person with obsessive compulsive personality disorder, I am quite the perfectionist, so I was still able to keep my photography gear in great condition all through the years.

However, I finally decided to get one of those digitally controlled dry cabinets since I have upgraded my DSLR and added a couple new lenses recently that I felt it was high time to finally invest on a dry cabinet to ensure that my gear will be in great condition for as long as possible. And there in lies one of the key words… INVEST.

It is a great investment to spend a couple bucks on a dry box or dry cabinet, because you owe to yourself and your gear. It is not an expenditure, it is an investment… a form of security and insurance.

And so, we will be reviewing the ANDBON AD-30S 30L Electronic Automatic Digital Control Dry Cabinet Storage.


SPECS:

•Model NO: AD-30S
•External Size: W290 x D320 x H420 mm (11.5″x12.6″x16.5″)
•Internal Size: W288 x D290 x H355 mm (11.3″x11.5″x14.0″)
•Pack Size: W350 x D380 x H470 mm (13.8″x14.9″x18.5″)

•Digital LCD display
•Andbon Dry Box Series (25%~60% RH) provides the best moisture damage prevention for aging, molding, spoiling, rusting, corrosion, denaturing, etc
•Auto Memory Last RH Setting
•Slide/Pullable Trays,Anti-Rust Cabinet (special coated paint), Silent Operation
•Low Power Consumption,Worldwide Voltage: 100-240V,Lockable — Door (comes with two keys), Magnetic Sealed Door for best RH control
•Power Input: AC 100V ~ 240V / 5W

Inside the box includes the power adapter and an instruction manual that is kept underneath one of the foams in the bottom compartment of the unit. I must admit, I was scratching my head as to were the manual was, but I always inspect the entire unit of whatever I purchased just to see any hidden damages, and thankfully, upon removing the foam, I found the instructions.

DSC_0009
The manual is hiding underneath the foam

DSC_0006

It also comes with 2 keys for the locking mechanism.


REVIEW:

As always, we start with the packaging, and the unit was packaged well enough, being flanked by hard Styrofoam; I like harder Styrofoam material than the softer ones, as the former will help ensure a safer delivery.

DSC_0002

DSC_0003

DSC_0004

The glass on the door wasn’t protected by its own plastic cover (the ones you usually peel off in new phones or the like), but was happy to see that the glass wasn’t scratched up as much or at all. But it would be nice to have its own dedicated plastic cover to peel off… There was no mention as to what material this glass was made of. But it is ever so slightly smoked, but under well lit environment or when you switch on the LED inside, it can showcase your gear wonderfully. I wished the LED strip were situated on both sides for even lighting, but either way, it does the job.

DSC_0005

The unit itself is VERY light, as it doesn’t really need a lot of electronics; this may look like a mini fridge, but all it in needs is a electronic display, a strip of LED, the actual dehumidifier with anti bacterial wafer chip, and a simple power supply to power them all. This is essentially just a display case with the added features of dehumidify inside the little controlled environment.

Overall, the build is great and very sleek, and compared to the plastic dry boxes, this adds a bit of flare to your gear. I love the looks!

The foams are firm, but the top foam with the contours for lenses should have spaced the contours/concavities a little bit more; as you can see, there are too close to each other that my lenses are not sitting flush with the concavities. This should not be a problem for mirrorless camera lenses and such, but I wished they thought about spacing them out just a little but more to accommodate lenses like mine –  and my lenses are pretty much the Trinity of lenses that most professional photographers or hobbyists like myself would own. There is still enough space to space the contours out a bit more. But I can always ask someone locally to make me a custom foam with my specifications in the future.

DSC_0010

DSC_0013
The foam contour/concavities don’t really accommadate my lenses

The actual sliding tray is made of a very tough plastic material that I suspect is ABS plastic; the mounting mechanism is also made of plastic, most likely also ABS plastic, and surprisingly, it can carry the weight of my 4 lenses even when extended fully (it locks into place when extended fully, but a little lift and pull, you can pull of the entire assembly). The mount can also be adjusted to certain heights for your needs. I am still wary when I extend the tray out with my lenses on, so for peace of mine, I still secure the tray underneath with my palm while I select what lens to use.

DSC_0011
There is a tape holding the tray in place for shipping purposes; there are 1 on each side, so remove them

DSC_0014

IMG_3957

The tray can accommodate my 150-50mm, my 17-50mm, and my 30mm; seeing that there is still space, I placed my old kit lens in there and I can still add either a 10-20mm or a fisheye in the future.

The bottom compartment I use to house my 2 DSLR’s, the Nikon D5000 and the Nikon D7200 with the MB-D15 battery grip installed. I also included my 2 Nikon SB-600 speedlights, a Meike FC-110 LED ring flash, my DSLR’ batteries and chargers, my LYNCA memory card reader and case (review here!), and seeing I still had enough space, I just threw in the lens hoods just for fun (they won’t stay in there forever). And I know I can still add another DSLR or another flash here in the future no problem.

IMG_3956

Of course, the top tray and bottom compartment isn’t strictly for lenses and bodies/flashes respectively, you can interchange them or even not use the entire unit for you photography gear as it can be used for books, bags, jewelry, etc. Of course, with different items, comes different relative humidity percentages (%RH). For my needs I am told 40-50%RH will be ideal for cameras and lenses, and since this unit has a +2-3%RH, I placed set mine in 42%RH (that means if it reaches 42%RH, it will then go up to 44%RH or 45%RH and then dehumidify again to 42%RH). The %RH will obviously shoot up when you open the unit to grab a piece of item, so you shouldn’t be surprised by it.

%RH
%RH reference guide as per the manual

It is also of note, if you are not in a humid environment, the dehumidifier will not work if your ambient humidity is lower than the humidity set on your unit.

Let’s look at the display and buttons and how to set this up for the first time:

Display

Buttons

Wrong
This part of the instructions are wrong, read on below…

As you can see from the screenshots from the manual, it said that you have to tap the up button TWICE to choose what %RH you want to set, this for me was wrong; I had to press the SET button TWICE, then use up and down buttons to choose my %RH and press SET again to confirm the change.

After setting the %RH, it is suggested in the manual and several forums to leave it empty for at least 8 hours; from my photo, I showed the time I started and the time I would start adding my gear, but I decided to make it 10 hours.

DSC_0020

And thus, here is a shot of my dedicated photography gear corner of my room; this corner has all the most commonly used gear and accessories, and the other less commonly used items are stored elsewhere.

IMG_3948

IMG_3953

IMG_3955


CONCLUSION:

I paid PHP4,200 (~$80) plus shipping, and somehow it didn’t feel as if I spent a cent on this, because as I said above, this is not an expenditure, it is an investment.

It looks sleek and professional, unlike the conventional dry boxes, and you need not have to “settle” in unlike in the dry boxes where it can take a day or two to dial and settle in the silica gels to the right %RH – this is done digitally and immediately with this one.

The near clear glass shows off your gear wonderfully in proper lighting or when the LED is lit inside, but again, I wish the LED strips were on either end for more even lighting.

The tray and tray mount would give me more peace of mind if they just made it metal; I wouldn’t mind paying a little more for that. Being a very tough plastic, it does hold my lenses well enough but not enough for me to feel confident when I slide the tray out; I still have one palm underneath the tray.

The foam, particularly for the lenses, I wished the contours/concavities were spaced out just a tad more for larger lenses to fit better; I don’t imagine this being a problem for lenses with 62mm threads or mirrorless camera lenses though.

But with all that said and done, would I recommend this? A BIG YES… I mean I already said it twice: this is not an expenditure, it is an investment.

This keeps most of the dust away from my gear, heck even insects; it inside a controlled environment to inhibit fungal growth, yet humid enough to to keep the lubrication of my lenses from evaporating; and it serves as a nice display case for my gear – I do just sit down and stare at it at times.

Of course, this is another one of those Chinese OEM products that have different brands slapping their name on it… So, find one similar to mine, and you will most likely get the same performance.

Well, that’s all! Time for me to stare at my gear inside the ANDBON AD-30S 30L Electronic Automatic Digital Control Dry Cabinet Storage again.


Follow me here or on the following sites!

•Follow me on Twitter!

•Follow me on Flickr!

•I’m also at Facebook!

•Perhaps Google+!

•Do you game? Add me on Steam!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s