DISCLAIMER: I am not a professional reviewer; I review the things I buy as a consumer. I am not at all sponsored. I am an average consumer, giving my consumer thoughts.
Ever since I switched my PC chassis roughly 2 years ago, I no longer had the benefit of using a 3.5 inch internal card reader, because my current chassis, the Phanteks Enthoo Eveolv ATX doesn’t have mounts for 5.25 or 3.5 inch drives, thus I had to forego my Bitfenix internal card reader.
I didn’t own any USB 3.0 card reader hubs back then since I was mainly using the internal card reader, so I have to revert to connecting my DSLR’s using the supplied USB cable from Nikon. And as you’d expect, the transfer rates are slow. Not only that, I hated always connecting my Nikon D5000 or D7200 thru USB especially if I forgot to copy over a photo, because Windows will read the whole card (slowly) inside the DSLR’s as it seems it doesn’t save any information of the photos in the cache.
Knowing I needed a USB 3.0 card reader and a new SD card case (since my old one is so cheap), it was time to hit the market for those items.
Lucky for me, there is the LYNCA Waterproof Memory Card Case with Built-In USB 3.0 Card Reader. Yes that was a mouthful… and it always seems to have a different name in different shops… but at least, the LYNCA branding stays the same.
By the name, it is obviously hitting 2 birds with 1 stone for me; a case and a USB 3.0 card reader.
I didn’t get it right off the bat as I wasn’t to keen in PHP 2,000 (~$40) for such an item, and that is due to the looks, which I will get more into down below in the review. Then it went on sale with a 50% off, then I had no other reason not to get it; whether it will it has bad performance, or God forbid, die out within a few months, I wouldn’t cry a river knowing I only paid PHP 1,000 (~$20).
Item in Review:
Number of Slot: 19
CFx3, SDx7 and TFx9 Card (for those wondering what TF is, it is Transflash, aka, MicroSD; Transflash was simply the original name for MicroSD’s untile MicroSD nomenclature became mainstream)
1x Card Case/Reader
1x USB 3.0 Type A Female to USB 3.0 Type B Male 10 Pin (38.1cm/15″)
1x USB Type A to Micro USB adapter
1x Micro USB to USB 3.0 Type C adapter
1x Sim card tray remover
First off, it was surprisingly well packaged; sure it doesn’t hang the bang or presentation of products of AAA companies, but the main point for me is that the packing is well enough to keep the item protected in shipping, so it will arrive to me in great condition. Close friends of mine know that I usually keep boxes and display them for 2 reasons: 1 is to have some bragging rights for the awesome gear I have and 2, simply great for reselling purposes. But for little gadgets like these, I care not to keep the boxes honestly, so it may lack in the presentation, but it gets the job done.
In fact, lacking is the presentation that it doesn’t give much specs in the box, so you can always use the specs I placed above instead, if you are wondering about the item and what comes with it.
The USB 3.0 Type A Female to USB 3.0 Type B Male 10 Pin is roughly 15 inches in length, however, I find that very short even if you connect it in the front USB panel of your PC (well it depends on the height of your PC chassis and its location, either on the desk or on the floor, but for my use and my setup, it is indeed short), thus it is absolutely short if you plan to connect this to the back of your PC; be prepared either way to stand up each time you want to change the card you are trying to import pictures from. An easy fix, which I already did, was buy a 3rd part USB 3.0 Type A Female to USB 3.0 Type B Male 10 Pin cable. I understand why it is only 15 inches, because, after all, this seems to have travel in mind, so you want to pack shorter cables when traveling as to save space, and honestly, you’d want a shorter cable for your laptop when you travel. And speaking of laptop users, you won’t have the same problems with the shorter cable as mentioned above.
The package also includes 2 adapters, a USB Type A to Micro USB adapterand a Micro USB to USB 3.0 Type C adapter, that have their own rubber sleeves making them linked to the USB cable, thus not losing them, but I find the rubber sleeve a dirt magnet. Of course, if you want, you can simply remove the rubber sleeve links, especially if you are not planning to use those interfaces for you devices.
I mentioned earlier that I was not keen on paying full price for this item due to the over all looks, and I still stand by the fact that I wished they didn’t go for that miniature suit case look. I am more of the minimalist type, and sleeker clean designs are what I wanted best. If it had that sleek design, maybe I would pay full price, with that said, it looks like a toy. That may not bother a lot of people, but for those that still love form AND function, like me, it does put a bit of a letdown especially since most photographers and hobbyists will definitely have photography gear that is respectable and the looks of this case/card reader is kinda tacky. But that’s just me.
Build quality, well I did say toy earlier, and it does feel like a toy, but a tough toy at that since they did use ABS plastic. I still would want to constantly thrash this around, but for normal everyday use and travel, it will definitely stand the test. Though I might want to mention the tabs are also made of plastic and as far as plastics go, they may wear out in time with the constant opening and closing of the case/card reader
The rubber cover for the actual card reader, is held on by a very small piece of rubber that will definitely break off if you abuse it.
The USB 3.0 Type B 10 pin female connection is not covered… just something to keep in mind. It is also situated on the side of where the hinges of the case are placed, so having the case wide open and transferring photos won’t be possible; that is to say, that you can open the case and still transfer photos, but not fully open. You can still access the cards inside if need be very easily.
As for the inside of the case, it is mostly made of rubber as to keep the cards in place safely and supposedly be waterproof on the edges; I am a bit skeptical and am lazy to actually test this, but I am skeptical since the rubber edges don’t seem to create a very good seal. But yeah, maybe I will update this once I tested the waterproof capabilities, but I also mentioned above, that the USB 3.0 Type B 10 pin female connection is not covered, so maybe the waterproof aspect is just to save the memory cards inside, then again, why have a rubber cover that seals the card reading connections? Why leave the USB 3.0 Type B 10 pin female connection to dry, errrr, to wet? (LOL) Anyways, that is another reason why I also don’t want to test the waterproof capabilities of the item.
On the actual card reader, it can also house once more SD card if need be. And speaking of housing the cards, it advertises that it can store CFx3, SDx7 and TFx9 Cards, but what I found out, you can stack your SD cards on top of another, thus you can house up to 12 in the rubber casing plus one on the actual card reader, totaling up to 13 SD cards. As for the CF and TF, since I don’t own any CF cards, I can’t give a definite answer, but I can say that it does only hold as advertised, as with TF.
You will also notice there is a sim card tray remover, just in case you ever need it. A nice touch in my opinion as there are times when I wished I had one while I’m out.
Now for the actual performance: being a USB 3.0, which can handle up to 5GB/s, we can suspect speedy read and write speeds. I will give you is my transfer times and real time average transfer rates compared to my DSLR, in this case, we will use the Nikon D7200 to transfer 15GB of RAW files from my more recent shoot using a SanDisk Ultra 32GB, 48MB/s read speed, SDHC card.
Using the Nikon D7200, I was took me over a little over 12 minutes. Not too bad at all, but my main gripe is what I mentioned earlier in which it constantly buffers the photos so having to search for that certain photo or photos you want to transfer only can be a chore. Windows, sadly didn’t give me the transfer rate.
Then using the LYNCA card reader, I transferred 15GB of only RAW files in 4 minutes; there was also little to no buffering when searching for selected photos unlike the DSLR where it seems there was no cache saved in the PC, thus it rebuffers, costing time, if you are just looking for certain photos in the card. As for transfer rate, I was averaging 42MB/s. So, it was definitely faster.
I didn’t test it with my other SD card like a SanDisk SDHC class 4, I can say it will be slightly slower, and I didn’t test it with my SanDisk Extreme PRO 32GB SDHC Class 10 U3 UHS 1 card, because I would suspect that it would transfer faster since it has a 95MB/s read speed. And that is another point to make, the transfer speed depends on the card and the files as much as it depends on the interface of transferring.
It does the job! And it does it well. If we simply look at this as a card reader, then it is definitely a great item especially when you get it at 50% off like me. The fact that it is also a case for your memory cards comes as gravy, a cherry on top, or whatever analogy you want. I wished the design leans more to the professional and be more sleek and minimalist, but again, that is just me. I would also would have loved a longer USB cable, but I guess it is understandable as this is also geared towards travel, thus you won’t want to lug around long cables.
Another gripe would be the USB 3.0 Type B 10 pin female connection is not covered like the other connections, thus even if this is waterproof, that being exposed, will not end well.
Will I recommend this? Absolutely! But I feel the asking price originally is still a lot especially from a brand that is not really super known. I would wait for a sale. Keep in mind, this is definitely one of those OEM type products where niche companies will just slap their brand on. So you can find similar products like this with different branding. But as far as OEM goes, this review should also cover them.
So there you go! This is bang for the buck especially when on sale. Still bang for the buck, in a way, full price, but like I said, from a company like them, I rather pay less, so even if, God forbid, this bites the dust in time, it won’t hurt at all paying half price.
Follow me here or on the following sites!