In my previous post about finally building a Sim Racing Rig, I mentioned that I modded the brake pedal by removing the rubber stopper/block that Logitech put in order to simulate progressing brake tension, but the design was poorly thought out as the rubber block/stopper, made it next to impossible to brake fully. Thus I decided to remove it.
Not satisfied with such a simple mod, I wanted to make the Logitech G920 pedals feel a lot better and a lot more responsive, especially in the throttle; I felt the throttle spring is too light and have fine control of throttle a little bit tricky. I also found the stock face plates of the pedals didn’t really feel comfortable as the are a bit too tiny, especially in the throttle, thus I decided to be on the lookout for after market pedal face plates.
Thankfully, as is with most racing wheels for simulators, they are nearly identical to real life counterparts, so you may use after market parts for real cars in the racing wheel and pedals.
I found a cheap enough pedal set, with a long enough throttle to feel comfy and a large enough, rally style brake face plate, that can make it easy for me to do heel toe braking if I need to (which I don’t need so much in F1 games), and it being large enough, makes it very comfortable to brake.
I then decided to switch the stock clutch face plate with the stock throttle face plate, since I bought the after market face plates without the clutch; the stock throttle face plate is large enough for the clutch in my opinion.
I then switched the springs from the clutch to the throttle and vice versa; the stock clutch spring had more tension than that of the throttle, and I felt that if when I need to use the clutch, I want it to be pushed down completely and quickly. Whereas the stock throttle spring had little to no tension for me, making it difficult to pepper the throttle to control the speed in corners when trying to lift of. So by switching the springs around, I got the tensions I want for both the clutch and the throttle. (Note: I removed the face plates of both the throttle and clutch in order to work on them)
After all these, was it worth the time, effort, and expenditure? As with all hobbyists, they would say of course it was without having good tangible evidence as to back up the purchase. Well I do…
I was just having a quick drive around Monaco where my best time with my personal car setup was a 1:19.231 (I am not the greatest sim racer out there; others easily get 1:13.00s) and shattered it, while not driving really seriously, with a 1:18.897. So, yeah, it was worth it.
What is my next project for the SimRig? I do wanna make 2 dedicated sim dash devices so I don’t always have to use my iPad mini and my Zenfone 2; plus I get to program exactly how I want them to look and what telemetry to collect using readily available programs intended for Arduino. Though I won’t be doing it anytime soon as I don’t have so much time for such projects just yet. But it will happen sometime.
Til next time! PEACE!
Follow me here or on the following sites!